Castrol Optigear Synthetic 800/2200
ISO VG 2200 extreme pressure gear oil
Buy
No retailer listing is on file for this oil. Email us and we will point you at a distributor. A quote form, and Zoro, Walmart, eBay, Grainger, MSC and Global Industrial, wait on programs that are not connected yet.
As an Amazon Associate, Evolvent Design earns from qualifying purchases. McMaster-Carr links are not affiliate links.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 2200 cSt | ASTM D445 |
| KV100 | 350 cSt | ASTM D445 |
| Viscosity index | 320 | ASTM D2270 |
| Pour point | -14 °C | ASTM D97 |
| Flash point | 271 °C | ASTM D92 |
| Density at 15 °C | 1.06 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 2200 (1980–2420 cSt).
- Computed viscosity index is 322, within 2 points of the listed 320.
Viscosity and temperature
ASTM D341 (Walther) fitted to the published KV40 and KV100. It is an interpolation between those two points, and it is not meaningful below the pour point. Move the control to read a temperature.
Classification
- Category: Gear
- Attribute: Extreme Pressure
- Synthetic: Synthetic
- Base oil: V PAG
- AGMA class: AS
- FZG fail stage: >=12
- Copper: 1A
- Note: For the lubrication of heavily loaded gears, brushings and bearings over a wide temp
Sulfur, EP additives and yellow metal
Extreme-pressure gear oils use sulfur compounds so steel teeth do not weld under shock. That same sulfur can tarnish or pit copper, brass and bronze: a bronze worm wheel, a brass cage, a cooler tube. ASTM D130 sits a polished copper strip in the oil and scores the colour. 1A and 1B are the ratings to keep when yellow metal shares the oil. The strip below is that test at room temperature.
How lubricant-induced copper corrosion works
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
- Product data sheet
- Safety data sheet
- Specs last read from the data sheet on 2026-09-09.
Related: Castrol, Optigear Synthetic 800, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Castrol Optigear Synthetic 800/2200 an ISO VG 2200 oil?
Yes. The catalogue lists it as ISO VG 2200, which is a kinematic viscosity of 2200 cSt at 40 °C, plus or minus 10 percent (1980 to 2420 cSt). Confirm the current data sheet before you fill a machine.
What is a Castrol Optigear Synthetic 800/2200 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Castrol Optigear Synthetic 800/2200 be mixed with mineral oil or PAO?
No. This oil is a PAG (polyalkylene glycol). PAG does not mix with mineral oil or PAO. Drain and flush before changing into it or out of it.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.