Mobil Mobilmet 424
ISO VG 22 cutting fluid oil
Buy
No retailer listing is on file for this oil. Email us and we will point you at a distributor. A quote form, and Zoro, Walmart, eBay, Grainger, MSC and Global Industrial, wait on programs that are not connected yet.
As an Amazon Associate, Evolvent Design earns from qualifying purchases. McMaster-Carr links are not affiliate links.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 23 cSt | ASTM D445 |
| KV100 | — | ASTM D445 |
| Viscosity index | — | ASTM D2270 |
| Pour point | -15 °C | ASTM D97 |
| Flash point | 200 °C | ASTM D92 |
| Density at 15 °C | 0.862 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 22 (19.8–24.2 cSt).
Viscosity and temperature
KV40 and KV100 are both needed before ASTM D341 can draw a curve.
Classification
- Category: Cutting Fluid
- Synthetic: Conventional
- Copper: 1B
- Note: Multipurpose cutting
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Mobil, Mobilmet 420 Series, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Mobil Mobilmet 424 an ISO VG 22 oil?
Yes. The catalogue lists it as ISO VG 22, which is a kinematic viscosity of 22 cSt at 40 °C, plus or minus 10 percent (19.8 to 24.2 cSt). Confirm the current data sheet before you fill a machine.
What is a Mobil Mobilmet 424 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Mobil Mobilmet 424 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.