Mobil Mobilcut 140
Cutting fluid oil
This page is not indexed. It is missing a real data-sheet link, a grade, or three of viscosity index, pour point, flash point and density.
Buy
| Retailer | Pack | Price | |
|---|---|---|---|
| Amazon | 5 gal | See retailer | Open |
Zoro, Walmart, eBay, Grainger, MSC and Global Industrial are reserved here and will show a row when a link exists. Prices are shown only when they were fetched in the last 24 hours. None of the Amazon links carries a stored price, so Amazon shows no price.
As an Amazon Associate, Evolvent Design earns from qualifying purchases. McMaster-Carr links are not affiliate links.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 59 cSt | ASTM D445 |
| KV100 | — | ASTM D445 |
| Viscosity index | — | ASTM D2270 |
| Pour point | -42 °C | ASTM D97 |
| Flash point | — | ASTM D92 |
| Density at 15 °C | 0.945 g/cm³ | typical |
Grade checks
- No ISO grade is stored.
Viscosity and temperature
KV40 and KV100 are both needed before ASTM D341 can draw a curve.
Classification
- Category: Cutting Fluid
- Synthetic: Unlisted
- Copper: Unlisted
- Note: Cutting! Water soluble, biostable
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Mobil, Mobilcut Series, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
What is a Mobil Mobilcut 140 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Mobil Mobilcut 140 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.