Chevron Cetus Hipersyn 220
ISO VG 220 anti-wear compressor oil
Buy
| Retailer | Pack | Price | |
|---|---|---|---|
| Amazon | 5 gal | See retailer | Open |
Zoro, Walmart, eBay, Grainger, MSC and Global Industrial are reserved here and will show a row when a link exists. Prices are shown only when they were fetched in the last 24 hours. None of the Amazon links carries a stored price, so Amazon shows no price.
As an Amazon Associate, Evolvent Design earns from qualifying purchases. McMaster-Carr links are not affiliate links.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 231 cSt | ASTM D445 |
| KV100 | 27 cSt | ASTM D445 |
| Viscosity index | 152 | ASTM D2270 |
| Pour point | -34 °C | ASTM D97 |
| Flash point | 260 °C | ASTM D92 |
| Density at 15 °C | 0.853 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 220 (198–242 cSt).
- Computed viscosity index is 151, within 2 points of the listed 152.
Viscosity and temperature
ASTM D341 (Walther) fitted to the published KV40 and KV100. It is an interpolation between those two points, and it is not meaningful below the pour point. Move the control to read a temperature.
Classification
- Category: Compressor
- Attribute: Anti-Wear
- Synthetic: Synthetic
- Copper: 1B
- Note: Synthetic, air compressor
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Chevron, Cetus Hipersyn, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Chevron Cetus Hipersyn 220 an ISO VG 220 oil?
Yes. The catalogue lists it as ISO VG 220, which is a kinematic viscosity of 220 cSt at 40 °C, plus or minus 10 percent (198 to 242 cSt). Confirm the current data sheet before you fill a machine.
What is a Chevron Cetus Hipersyn 220 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Chevron Cetus Hipersyn 220 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.