Chevron Cetus EliteSyn NG 150
ISO VG 150 anti-wear compressor oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 150 cSt | ASTM D445 |
| KV100 | 28.8 cSt | ASTM D445 |
| Viscosity index | 230 | ASTM D2270 |
| Pour point | -48 °C | ASTM D97 |
| Flash point | 240 °C | ASTM D92 |
| Density at 15 °C | 1.05 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 150 (135–165 cSt).
- Computed viscosity index is 232, within 2 points of the listed 230.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Compressor
- Attribute: Anti-Wear
- Synthetic: Synthetic
- Copper: 1B
- Note: Natural gas compressors, polyalkylene glycol (PAG) base
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Chevron, Cetus EliteSyn NG, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Chevron Cetus EliteSyn NG 150 an ISO VG 150 oil?
Yes. The catalogue lists it as ISO VG 150, which is a kinematic viscosity of 150 cSt at 40 °C, plus or minus 10 percent (135 to 165 cSt). Confirm the current data sheet before you fill a machine.
What is a Chevron Cetus EliteSyn NG 150 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Chevron Cetus EliteSyn NG 150 be mixed with mineral oil or PAO?
No. This oil is a PAG (polyalkylene glycol). PAG does not mix with mineral oil or PAO. Drain and flush before changing into it or out of it.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
